3-Cal Liquid Lime

3-Cal is superior because it has the surfactant that no other Liquid Lime on the market. The surfactant will help to penetrate the soil and move through the soil profile more efficiently. It also has an additive that helps 3-Cal remain in liquid form and not solidify.  Our competitor’s product will chunk up or turn into a brick and ours will not.  Even with a decent pH, adding 3-Cal is beneficial because it raises pH while opening your soil and giving plant available calcium.

3-Cal Liquid Lime will raise your pH quickly and will last all year! The particle size is very small.  It can react in the soil almost immediately, while also delivering calcium to the plants. 3-Cal will improve soil structure, raise pH, and provide plant available calcium, all in one product. 

Mixing Instructions

In a 5-gallon bucket, fill it about halfway with water.  Add in your rates of each product (1 product per bucket).  Mix well. A drill with a paddle/paint mixer bit works the best.  Add mixture to sprayer and dilute even more (at least 10gal of water per one gallon of 3-Cal)

Application Instructions

3-Cal Liquid Lime should be mixed with at least 10 gallons of water. We do not recommend letting the 3-Cal solution sit for an extended amount of time.  Rinse out your sprayer with water when you are done spraying.  It is also recommended that you remove all filters from your sprayer.

Generic Rates without recommendations or a soil sample: 2-3 gallons per acre

(we recommend getting your soil tested for more accurate rates)

GUARANTEED ANALYSIS:

Calcium Ca..........................................21%

Silicon as (SiO2)…………………………600ppm

CCE………………………………………………….55%

Derived from Calcium Carbonate

Lime Rate: 90-ECC